Qualitex Ascent Linear Drain Wetroom Shower Base 1500x900mm

Product Description

Designed for walk-in shower and wetroom applications, the Ascent Wetroom Trays are pre-formed to create an effective water slope to the drain. They are floor level panels that can easily be trimmed to fit the shower area. Trays are ready to receive a tiled finish of the customers choice.

Ascent pre-formed Wetroom Trays are made using a waterproof extruded polystyrene (XPS) and are covered on both sides in a combination of polymer resin and quartz, compatible with most tile adhesives. All Wetroom Trays are exclusively made to accept QX range of Linear and Square Drains. They are sufficiently robust to be covered with mosaic tiles without the risk of compression through point loading.

Ascent Wetroom Trays and Boards are suitable for use with Underfloor Heating. All Drains can also be used without a showerbase.
NOTE: Ascent Wetroom Trays ARE NOT SUITABLE for Vinyl Flooring.

Specification

Product Information:
Size – 1500 x 900mm
Thickness at Edge – 30mm
Linear Drain Size – 600mm
Pre-formed Wetroom Shower Base
Designed for walk-in shower and wetroom applications
Floor level panels that can be trimmed to size on site
Ready to receive a tiled finish
Material: Waterproof extruded polystyrene (XPS), covered both sides in a combination of polymer resin and quartz (compatible with most tile adhesives)
Suitable for use with underfloor heating
7 Drain options available
Rotate shower base for best waste position

Linear Drain Information:
Zonda Standard Drain – Stainless Steel grating in Mirror finish
Pure Standard Drain – ready for tiling with customers choice of tiles (not supplied)
Ponente Standard Drain – Stainless Steel grating with Mirror finish
Mistral Standard Drain – Stainless Steel grating with circular designs in mirror chrome finish
Slimline Black Drain – Stainless Steel grating with Matt Black finish
Slimline Sirocco Drain – Stainless Steel grating with Mirror finish
Slimline Mirror Drain – Stainless Steel grating with Mirror finish
All Drains include flange, membrane and trap.
Linear Drains are produced from 304 grade stainless steel and feature a flange on all four sides, enabling a perfect waterproof seal between the tiles and the drain, complimented by a textile sealing membrane.

Technical/Installation Information:
Waste is positioned 192mm from the edge of the tray to the centre of the waste.
Can be laid directly onto existing wooden or concrete floors but must be supported over it’s entire area, including trap.
If the shower base is to be laid directly onto the existing floor boards, they must be in good condition and must be screwed down at very close centres.
When the shower base is laid onto a concrete floor, the surface below the shower base must be perfectly flat, with a channel for the trap and waste pipe.
Care must be taken when preparing the slopes to the drain in all applications.
10 Year Manufacturers Guarantee